If your straps came separatly from the carrier, please cut the lower straps, since we will be bolting the strap to an L-Bracket, therefore the lower straps are not needed.

Attach the ratchet  strap the the "L" bracket. Use 3/8 Bolt, washer and nut

Attach the base plate (20" x 14") to the 2"x2" tube using 2 bolts and nuts, please tighten this as much as possible. Make sure you use the supplied washers on each side. Note: The plate is adjustable to be able to have more or less space from the hitch. It can be adjusted to have between 9 inches to 12 inches from the hitch. This is useful if you want to be able to open the trunk of your SUV and not hit the paramotor (in this case, use the maximum space, if maximum space is not enough you can add a hitch extension to your hitch to make more room)

Attach the Wheels and the L-Brackets containing the ratchet straps to the base plate. Use supplied 3/8 nuts, Make sure you use a washer on the wheel side. To make sure this is tighten, please use the small flat wrench (included) to hold the wheel, while you adjust the nut. Tighten as much as possible.

Place the supplied rubber matt on top of the aluminium plate.

Use your 4 straps to secure your paramotor. Make sure you do not OVERTIGHTEN the straps, becuse this can cause bending of the main plate. Straps should be tight, but not overly tight. If possible use a cross pattern on the front, and a regular pattern on the back.